7″ All-in-One Vehicle Computer with Touchscreen and Multi-Function Tracking Device
Main Feature
VMC 1100, the next generation 7-inch on-board computer powered by dual-core Intel Atom® processor, is designed for transportation and port applications that require real-time vehicle tracking and work dispatch. For real-time communication between the driver and the central control room, VMC 1100 provides GPS, WLAN to WWAN wireless connectivity. It offers RS-232, RS-485, USB 2.0, GPIO and LAN connectivity to get more data from the accessories. Dual CANBus 2.0B (OBDII and J1939 protocol), analog input and PWM can help to get the vehicle status more quickly and accurately. Due to the above unique features, VMC 1100 is perfect to be used in port applications such as container trucks, forklifts, reach stackers, etc.
| General | Cooling System: Fanless Case: Plastic PC + ABS with aluminum die-cast heatsink Mounting: VESA 75 bracket, stand mount Four SMA Type antenna connectors of BT/Wi-Fi/WWAN/GPS Power Input: 9 ~ 36VDC input with firing Power Consumption: 26W Ingress Protection: Front panel IP54 Dimensions: 213mm (W) x 145mm (H) x 50mm (D) (8.3" x 5.7" x 1.9") Weight: NW: 1.3Kg GW: 1.6Kg |
| LCD Panel | 7-inch TFT LCD Panel with LED Backlight 800 x 480 pixels (WVGA) Brightness: 400 cd/m² (typical) Contrast ratio: 600:1 (typical) |
| Touch Screen Sensor | 4-wire resistive touch Anti-glare coating surface Transmission rate: 78±3% |
| CPU and Chipset | Intel® Atom™ Dual Core E3825 1.33 GHz |
| Memory | One 204-pin DDR3L 1600MHz SO-DIMM slot (up to 4GB) - Default 4GB |
| Expandable Storage | 1 x SATAIII SATA DOM Slot (available option 16GB/32GB/64GB) |
| Expansion | 1 x Half-size mini-PCIe socket (USB 2.0, PCIe 2.0) 1 x Full-size mini-PCIe socket (USB 2.0, UART) 1 x external Mini-SIM for LTE module 1 x external module (USB 2.0, UART) for OBD/RFID module option |
| I/O Interface-Front | F1 ~ F5 function key Light Sensor Internal Microphone Input 2 x Internal 2W speaker 3 x LED indicator (Power mode, Storage and WWAN status) |
| I/O Interface-Lateral | Right side - 1 x Micro SD card slot - 1 x SIM card slot - 1 x USB 3.0 host type-A connector - 1 x Microphone-in, Line-out Left side - 1 x Power button - 1 x System reset button - Volume up/down or Brightness up/down |
| I/O Interface-Rear | 1 x 5-pin circular connector for power/ignition input 1 x RJ45 for LAN with 0V/5V/12V power supply (0.5A) 1 x RJ45 for RS-232 1 x DB9 (Male) - for RX/TX or RS-485 - 2 x CAN Bus 2.0 1 x DB15 (Female) - GPS dead reckoning interface (optional) - 2 x PWM, 2 x Analog Input, 2 x GPO, 2 x GPI Analog Input Requirement for Voltages Measured Channel: 2 Voltage Range: 0 ~ 38V Resolution: 8 bits Input Requirement for Frequency, Speed Square Wave Channel: 2 Frequency Signal Offset Voltage Range: 0 ~ 15VDC, 1Hz ~ 5KHz Protection: +/- 500V spike Frequency Signal Duty Cycle Range: 10% ~ 90% |
| Communication Module | 1 x u-blox NEO-M8N module (support GPS/Gloness/QZSS/Galileo/Beidou) Optional 1 x WLAN or Bluetooth module Optional 1 x WWAN module |
| Power Management | Selectable startup and shutdown voltage for low power protection 8-level on/off delay timer ready hardware design based on user's own configuration Power on/off firing, supports software-detectable S3 and S4 suspend mode; wake on RTC and SMS |
| Operating System | Windows 10 Windows 8 Professional, WES8 Windows 7, WES7 Linux Fedora (kernel V3.2.0) |
| Environment | Operating temperatures: Ambient -20°C to 60°C with air Storage temperatures: -30°C to 80°C Relative humidity: 10% to 95% (non-condensing) Vibration (random): 3g @5 ~ 500Hz Vibration Operating: MIL-STD-810G, 514.6 Procedure 1, Category 4 Storage: MIL-STD-810G, 514.6 Procedure 1, Category 24 Shock Operating: MIL-STD-810G, Method 516.6, Procedure I, trucks and semi-trailers = 20 g Collision hazard: MIL-STD-810G, Method 516.6, Procedure V, ground equipment = 75 g |
| Power Design and Protection | Load dump and inductive load protection Cold cranking protection Transient voltage protection Electrostatic discharge protection |
| Standards/Certificates | EMC - CE, FCC class B, E-Mark Power - SAE J1113 - SAE J1455 - ISO 7637-2 |
| Certification | ||||
|---|---|---|---|---|
| History | Definition | Version | YOU | Download |
| 2019-07-19 | THIS | Windows | 0.18 MB | |
| 2019-07-19 | Emark | Windows | 0.11 MB | |
| 2019-07-19 | FCC | Windows | 0.19 MB | |
| Driver | ||||
|---|---|---|---|---|
| History | Definition | Version | YOU | Download |
| 2017-05-15 | Sound | Windows | 171.4MB | |
| 2017-05-15 | Chipset | Windows 7 | 191.93MB | |
| 2017-05-15 | GPS | Windows | 11.97MB | |
| 2017-05-15 | Graphics | Windows | 245.66 MB | |
| 2017-05-15 | Network Adapter | Windows | 54.47MB | |
| 2017-03-02 | SDK | Windows | 1.17 MB | |
| 2017-05-15 | Touch Panel | Windows | 11.51MB | |
| 2017-05-15 | WLAN + Bluetooth Driver - QCOM ZQ802XRACB | Windows | 57.65MB | |
| Manual (Please Contact Sales Department ) | ||||
|---|---|---|---|---|
| History | Definition | Version | YOU | Download |
| 2017-07-03 | User Manual (Datasheet Only) |
1.39MB | ||
Mobile Computer Solutions
Product Request Form