Nexcom Mobile Panel PC – VMC 220
8″ Rugged Onboard Computer with NXP i.MX 8M Quad Processor, Projected Capacitive Touchscreen and IP65
Main Feature
- Embedded NXP i.MX 8M Quad low power processor, up to 1.3GHz
- 8″ TFT LCD monitor with projected capacitive touchscreen
- IPS LCD with wide viewing angle and 1280 x 720 resolution
- Touch panel covers are 3mm thick for IK08 protection
- Sunlight readability: 1,000 nits LCD brightness
- CVBS input x 4 for analog camera
- Isolated CAN Bus 2.0 x 1
- Wide range DC input from 9V~60V DC
- Fully IP65 waterproof
- Touch screen can be operated with various gloves (even in case of water spills)
Request
Datasheet
VMC 220, an 8-inch all-in-one rugged on-board computer, is designed for warehouses, ports, logistics and material handling markets. It applies NXP i.MX 8M Quad low power processor on Linux platform and offers full IP65 and IK08. VMC 220 can support 4 analog cameras for security purpose, and it takes less than 1 second to see the video content. LCD panel: 1,000 nits typical. guarantees sunlight readability. Wide-range power input (9V~60V) enables VMC 220 to be installed in various facilities and vehicles. The M.2 slot x 2 is designed for WLAN and WWAN wireless connection.
| LCD Panel | 8-inch TFT LCD panel with LED backlight 1280 x 720 pixels (HD) Brightness: 1000 cd/m² (typical) Viewing angle: 170° (H)/170° (V) Contrast ratio: 1000:1 (typical) |
| Touch Screen | Estimated capacitive Anti-glare coating surface Transmission rate: 80% ± 3 |
| Processor | NXP i.MX 8M Quad processor with 1.3 GHz frequency Quad Arm® Cortex®-A53 cores |
| Memory | Internal LPDDR4 2400MHz SDRAM 3GB |
| Storage | 1 x eMMC 32GB (BOM optional 64GB) 1 x Micro SDXC Slot |
| Expansion | 1 x M.2 2230 Key E socket (SDIO 3.0, PCIe 2.0, UART) 1 x M.2 3042/3050/3052 Key B socket (USB 3.0) 1 x external Micro SIM slot for LTE/5G NR module, 1 x internal Micro SIM slot |
| GNSS and Onboard Sensor | 1 x Default u-blox NEO-M8N GNSS for GPS/Glonass/QZSS/Galileo/Beidou Optional M8U/M8L modules are available with dead reckoning G-Sensor and gyroscope |
| AND | 1-port LAN, 10/100/1000Mbps |
| Security | TPM 2.0: Infineon SLB9665TT2.0FW5.62 (BOM optional) |
| I/O Interface-Front | Volume control keys (+/-) with LED Brightness control keys (+/-) with LED F1 ~ F4 Programmable function keys with LED 1 x Shift key with LED Light sensor 4 x LED indicators (power, WWAN, WLAN, storage) 2 x Built-in 2W speaker 1 x Small |
| I/O Interface-Lateral | Left Side - 1 x System reset button (with cover) - 1 x MicroSD slot (with cover) - 1 x Micro-SIM slot (with cover) Right Side - 1 x Power button - 1 x USB 2.0 type A connector with cover - 1 x Microphone in (mono), 1 x Line out (mono) with cover |
| I/O Interface-Rear | 1 x Full RS232 (with COM, 5VDC, 12VDC) 1 x Power connector, M12 A-coded 5-pin 1 x 10/100/1000 Mbps LAN, M12 A-coded 8-pin 2 x M12 A-coded 8-pin for USB 2.0 1 x M12 (MULTI-PORT1, A-coded 12-pin) - 2 x GPI - 2 x GPO - 1 x Isolated CANBus 2.0B - PWM (speed) + Direction + GND 1 x M12 (MULTI-PORT2, A-coded 12-pin) - 1 x RS232 (Tx, Rx) - 1 x RS232 (Tx, Rx)/RS422/RS485 - 4 x Composite video input 2 x SMA connectors for WWAN 3 x SMA for WLAN Connector 1 x SMA connector for Bluetooth 1 x SMA connector for GNSS |
| Mechanical | Cooling system: fanless Housing: plastic IK Rating: IK08 (body and touchscreen) Mounting: VESA 75 Ingress protection: full IP65 Dimensions: 250x179x67.5 mm Weight: 2.4 kg |
| Power Management | 9V~60V DC input Reverse protection/overvoltage protection/undervoltage protection Contact on/off control and programmable on/off delay timing Wake-up by SMS, RTC and ignition |
| RFID Module (optional) | Compliant with all major global secure baseband ISO standards, including 13.56-MHz RFID/contactless standard protocols ISO14443 Type A, MIFARE classic cards, and Smartlabel ISO15693 |
| Environment | Operating temperatures: -40°C to 70°C with air, ambient with air Storage temperatures: -40°C to 80°C Relative humidity: 10% to 90% (non-condensing) Vibration (random) - 2g@5~500 Hz (operating) Vibration - Operation: MIL-STD-810G, 514.6 Procedure 1, Category 4 - Storage: MIL-STD-810G, 514.6 Procedure 1, Category 24 Shock - Operation: MIL-STD-810G, Method 516.6, Procedure I, trucks and semi-trailers = 40g - Collision hazard: MIL-STD-810G, Method 516.6, Procedure V, ground equipment = 75g |
| Operating System | Linux |
| Standards/Certificates | CE/FCC class B/E13/IK08 |
Mobile Computer Solutions
